{"id":1254,"date":"2026-09-04T06:08:19","date_gmt":"2026-09-04T06:08:19","guid":{"rendered":"https:\/\/takmeeltrading.com\/blog\/?p=1254"},"modified":"2026-09-04T06:08:19","modified_gmt":"2026-09-04T06:08:19","slug":"drill-cuttings-transfer-pump-supavac","status":"publish","type":"post","link":"https:\/\/takmeeltrading.com\/blog\/drill-cuttings-transfer-pump-supavac\/","title":{"rendered":"Drill Cuttings Transfer Pump: Handling OBM, WBM and Drilling Waste with SupaVac"},"content":{"rendered":"

A drilling-waste transfer problem rarely begins with the words \u201cwe need a pump.\u201d<\/span><\/p>\n

It normally begins somewhere between the shaker, collection area, pit, tank, skip or treatment system\u2014when material containing mud and solids has to be moved reliably from one stage of the waste-handling process to another.<\/span><\/p>\n

Drill cuttings are particularly demanding because they do not behave like a conventional liquid.<\/span><\/p>\n

They can contain rock fragments, drilling fluid, sand, oil-based mud, water-based mud and other solids in continuously changing proportions.<\/span><\/p>\n

At Takmeel Global, we therefore approach drill-cuttings transfer first as a <\/span>solids-handling application<\/b>, and only then select the appropriate pump.<\/span><\/p>\n

SupaVac’s official application portfolio includes drill cuttings transfer, OBM\/WBM transfer, drilling waste management and rig-floor cleaning.<\/span><\/p>\n

What Makes Drill Cuttings Difficult to Transfer?<\/b><\/h2>\n

The characteristics of drilling waste change with:<\/span><\/p>\n

    \n
  • formation;<\/span><\/li>\n
  • drilling fluid;<\/span><\/li>\n
  • solids-control performance;<\/span><\/li>\n
  • water or oil content;<\/span><\/li>\n
  • cuttings size;<\/span><\/li>\n
  • density;<\/span><\/li>\n
  • time allowed for settling.<\/span><\/li>\n<\/ul>\n

    Material leaving the shaker may behave very differently from settled waste inside a pit.<\/span><\/p>\n

    A pump may therefore need to handle combinations of:<\/span><\/p>\n

      \n
    • drilling mud;<\/span><\/li>\n
    • drill cuttings;<\/span><\/li>\n
    • heavy solids;<\/span><\/li>\n
    • slurry;<\/span><\/li>\n
    • contaminated waste;<\/span><\/li>\n
    • settled material.<\/span><\/li>\n<\/ul>\n

      This makes \u201crequired flow rate\u201d only one part of the specification.<\/span><\/p>\n

      The pump also has to cope with the solids and the physical transfer route.<\/span><\/p>\n

      Map the Transfer Route Before Selecting Equipment<\/b><\/h2>\n

      We recommend defining exactly where the material starts and where it must finish.<\/span><\/p>\n

      For example:<\/span><\/p>\n

      Shaker \u2192 waste collection point<\/b><\/p>\n

      Pit \u2192 skip<\/b><\/p>\n

      Rig sump \u2192 waste tank<\/b><\/p>\n

      Collection vessel \u2192 treatment system<\/b><\/p>\n

      Storage area \u2192 disposal or processing equipment<\/b><\/p>\n

      For each transfer route, establish:<\/span><\/p>\n

        \n
      • horizontal suction distance;<\/span><\/li>\n
      • vertical suction lift;<\/span><\/li>\n
      • discharge distance;<\/span><\/li>\n
      • discharge elevation;<\/span><\/li>\n
      • solids size;<\/span><\/li>\n
      • solids concentration;<\/span><\/li>\n
      • material SG;<\/span><\/li>\n
      • available compressed air.<\/span><\/li>\n<\/ul>\n

        These are far more useful for pump selection than simply requesting \u201ca drilling waste pump.\u201d<\/span><\/p>\n

        SupaVac for WBM, OBM and Drill Cuttings<\/b><\/h2>\n

        The SupaVac SV60-V2 officially lists <\/span>WBM \/ OBM \/ Drill Cuttings transfer<\/b> among its applications.<\/span><\/p>\n

        The SV110-V2 officially lists <\/span>drilling mud and cuttings transfer<\/b>.<\/span><\/p>\n

        For heavier requirements, the SV250V and SV510 also list drilling mud\/cuttings applications.<\/span><\/p>\n

        This is important because the use of SupaVac for drilling waste is not an assumed extension of a generic sludge-pumping product. It is part of the manufacturer’s documented application range.<\/span><\/p>\n

        Why an Air-Operated Vacuum Pump Is Relevant<\/b><\/h2>\n

        SupaVac pumps recover material by vacuum loading and then discharge it under pressure.<\/span><\/p>\n

        That operating principle is particularly relevant when the waste stream contains substantial solids or settled material.<\/span><\/p>\n

        It is different from a conventional drilling mud pump.<\/span><\/p>\n

        A rig mud pump is designed for the drilling circulation system. A SupaVac is not proposed as a replacement for that function.<\/span><\/p>\n

        Its role is in the <\/span>recovery and transfer of drilling waste, sludge, slurry and cuttings<\/b>.<\/span><\/p>\n

        Maintaining this distinction is important when evaluating the equipment technically.<\/span><\/p>\n

        SV60-V2: Portable Cuttings and Mud Transfer<\/b><\/h2>\n

        The SV60-V2 is one of the most straightforward SupaVac models to consider where portability is required.<\/span><\/p>\n

        SupaVac publishes:<\/span><\/p>\n

          \n
        • throughput up to 27 m\u00b3\/hr at SG1.0;<\/span><\/li>\n
        • 75 mm suction and discharge;<\/span><\/li>\n
        • solids handling up to 50 mm;<\/span><\/li>\n
        • 150 cfm air consumption at the stated operating pressure;<\/span><\/li>\n
        • WBM, OBM and drill-cuttings transfer as an official application.<\/span><\/li>\n<\/ul>\n

          These figures are manufacturer ratings under stated conditions.<\/span><\/p>\n

          Actual field throughput with dense drilling waste can differ significantly according to solids concentration, SG, hose layout, suction lift and discharge conditions.<\/span><\/p>\n

          SV110-V2: Higher-Duty Mobile Sludge and Cuttings Handling<\/b><\/h2>\n

          SupaVac lists drilling mud and cuttings transfer among the applications for the SV110-V2.<\/span><\/p>\n

          It is a mobile air-operated vacuum loading\/pressure discharge unit intended for more demanding sludge and solids duties.<\/span><\/p>\n

          Where the waste stream becomes heavier or the job requires greater solids-handling capability than a smaller portable unit, the SV110 may be one of the models evaluated.<\/span><\/p>\n

          Final selection should still be based on material data rather than choosing an SV110 simply because the application is drilling.<\/span><\/p>\n

          SV250V: Heavy Drilling-Waste Transfer<\/b><\/h2>\n

          For larger requirements, the SV250V has a 100 mm suction\/discharge configuration and lists drilling mud and cuttings transfer among its applications.<\/span><\/p>\n

          SupaVac publishes transfer capacity in excess of 60 m\u00b3\/hr at SG1.0, with multiple jet-pack\/air-consumption configurations available.<\/span><\/p>\n

          SupaVac has also published an oil-and-gas case involving upgraded SV250 units used within a cuttings-blower system. The manufacturer reports that those pumps operated across multiple locations over an eight-year period with zero reported downtime in that specific application.<\/span><\/p>\n

          That project evidence should be understood as a documented case result, not a universal uptime guarantee.<\/span><\/p>\n

          SV510: Higher-Capacity Solids Transfer<\/b><\/h2>\n

          The SV510 officially lists <\/span>capture and transfer of drill cuttings<\/b> and can handle sludge, slurry, mud and other high-solids materials.<\/span><\/p>\n

          SupaVac publishes recovery rates up to 90 m\u00b3\/hr for various materials under stated conditions and identifies a 100 mm vacuum-load connection with solids handling up to 70 mm.<\/span><\/p>\n

          For very demanding cuttings-transfer requirements, this gives project teams another SupaVac configuration to evaluate.<\/span><\/p>\n

          Pump Capacity Is Not the Same as Field Transfer Rate<\/b><\/h2>\n

          A manufacturer’s maximum throughput figure should never be copied directly into a project expectation.<\/span><\/p>\n

          Performance can be influenced by:<\/span><\/p>\n